• Mail

Chromedecu.org

  • Register
  • Log In
  • Home
  • Getting Started
  • Shop
  • Ecus
  • Software
  • Tuning
      • Accell/Decell
      • Active Exhaust
      • Boost Gauge
      • Closed/Open Loop
      • Common Problems
      • Custom Pins Outputs
      • Diagnostics
      • Ecus
      • EGR
      • Fan Control
      • Fuel
      • Fuel Pump
      • Getting Started
      • Idle
      • Intake
      • Knock Check Engine Light
      • Launch Control
      • Lean Spool
      • Limits
      • Limp Mode
      • No Lift to Shift (NLTS)
      • OBD2 Inspection Monitors
      • Peripheries
      • Purge
      • Sensor Scaling
      • Software
      • Start up
      • Timing
      • Turbo
  • Tech How To’s
    • How To’s

      • ECU Installation
      • 3000GT Year and Specification (Fed/Cali) Identification
      • No Lift to Shift (NLTS)
      • Wideband Oxygen Sensor WBO2
      • Radiator Fan Control Conversion for Flash Ecu
  • History
  • Contact
  • Cart - $0.00

    No products in your shopping cart.

Shop

You are here: Home » Shop » 3rd Party Tools » Tactrix Openport 2.0

Tactrix Openport 2.0

$179.00

The OpenPort 2.0 is Tactrix’s newest tuning tool hardware that is capable of communicating with a most OBDII compliant vehicles using a standard J2534 interface. Combined with Tactrix EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.

Tactrix  includes a USB cable with each OpenPort, which is all the hardware you’ll need unless you have one of the few vehicles that require a separate reflash adapter. For Subaru you’ll only need a reflash adapter for the 2001 through 2005 WRX, but not STi. For Mitsubishi, you’ll need the adapter for most pre CAN vehicles which include the 3000GT/Stealth and the 5-9 Evo. Choose the adapter you need from the ‘Reflash Adapters’ drop down list.

Buy Now from Tactrix

Category: 3rd Party Tools
  • Description
  • Reviews (0)

Description

Technical Details

  • 72Mhz 32-bit processor
  • USB 2.0 full speed device (USB-A/Mini cable included)
  • Field upgradeable software
  • Supports these major OBD protocols:
    • CAN 2.0 (CAN/ISO15765)
    • K-line (ISO9141/ISO14230(KWP2000)/dual K line)
    • J1850 (PWM/VPW)
  • J2534 PassThru support with Windows DLL
  • Standalone datalogs to microSD / microSDHC card without a laptop
  • Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
  • Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
  • RGB status LEDs

Designed, manufactured, assembled, and tested in San Francisco, USA

Tactrix is not affiliated with ChromedECU.

Copyright © 2013 Tactrix. All Rights Reserved.

Reviews

There are no reviews yet.

Be the first to review “Tactrix Openport 2.0” Cancel reply

You must be logged in to post a review.

Related products

  • EcuFlash

    Download from Tactrix
  • EVOScan

    Buy from Limitless

Need Chromed ECU Help? Post Up!

© Copyright - Chromedecu.org - Replete e-Commerce Theme by Kriesi