94-97 US VR4 and 94-96 Dodge Stealth TT Plug and Play Flash Ecu Installation

94-97 US VR4 Sticker

Thank you for purchasing a Jesters Plug and Play Flash Ecu. This ecu can be utilized for the following  94-97 US VR4 depending on internal jumper setup. Please double check you are using the correct instructions for your application.

Package Contents:

1x Plug and Play(PNP) Flash Ecu

1x New Mitsubishi Flash plug and yellow lead wire

5x new car side pins for ecu plug

Installation Instructions 94-7 US VR4

You will need to determine year and Specification (Fed/Cali) Here  of your car before setting up your ecu.

Jumper setup:

If your ecu jumpers do not look like the setup below double check your ecu version.

The 94-97 US VR4 PNP ECU can be set up for a  94-95 fed spec US VR4 see below .

94-95 US VR4 Fed Spec Jumper Setup

The 94-97 US VR4 PNP ECU can be set up for a  94-95 Cali spec US VR4 see below .

94-95 US VR4 Cali Spec Jumper Setup

The 94-97 US VR4 PNP ECU can be set up for a  any 96-97 US VR4  see below .

96-97 US VR4 all Jumper Setup

Step 1- With car off, remove stock ecu(See A) from behind center console.

Step 2- Plug the yellow flash wire into pin 57 in the stock 12 pin plug.

Step 3- Plug in the 4 stock plugs into PNP ecu.

Step 4- Route the yellow wire and attach white flash plug to small bracket forward of the stock OBD2 plug. See B.

Obd2 setup

Your car is now converted to a Flash Ecu running Chrome. It is a full OBD2 ecu. You can now use any OBD2 reader or the Tactrix 2.0 cable to reflash or datalog your car(91-93 cars  use the supplied adapter).

The plug views below is as if you were looking straight at the ecu plug or the back of the vehicle ecu plugs.